E-mail:
exexportmachinery@126.com
Tel:
+86-15256547590
English
français
русский
Español
العربية
Pilipino
Polska
shqiptar
hrvatski
საქართველო
Lietuva
The printing unit can register in 360degrees. Each printing unit can indepen deftly gear and loosen to have the units continue printing.
The printing units are all equipped with a group of infrared dryers respectively .
Each IR dryer device of printing unit can interchange of UV dryer device.
The inking roller can automatically fall off at stoppage and transfer at low speed in order to keep the ink from being dry and solid.
Characteristics:
The main motor adopxs imported converter to govern in a steepless way .
Feeding and discharging are controlled through magnetic powder brake and clutch (Japanese Mitsubishi aut tension controller) .
Unhindered system is controlled by auto rectify sensor.
Adopx ceramic mesh distributor roller, which is characterized by durability , wear resistance, and corrosion resistance, The doctors can be Used, which is more efficient for reducing the times for changing in order to increase the production efficiency.
The printing unit can register in 360degrees. Each printing unit can indepen deftly gear and loosen to have the units continue printing.
The printing units are all equipped with a group of infrared dryers respectively .
Each IR dryer device of printing unit can interchange of UV dryer device.
The roofing device is adopxed with a group of infrared dryers respectively.
The inking roller can automatically fall off at stoppage and transfer at low speed in order to keep the ink from being dry and solid.
The roll feeding, printing, auto infrared drying. Laminating and rolling can be processed in one processing. Lt is characterized by wide application, non-population of printing ink and fast drying, quick printing. So it is an ideal printing machine for the commercial bill to print high Graded free adhesive trademark.
Web width | 320mm |
Print width | 310mm |
Unwind Diameter max | 600mm |
Rewind Diameter max | 600mm |
Press Speed max (Production speed depending on process, job etc.) | 60m/min |
Gear Pitch | 1/8” (3.175mm) |
Flexo Print Units (IR dryer): | 4 |
Die-Cutting Units: number | 1 |
Min.Max repeat Print Cylinder | 7” - 13.5” |
Web Guiding: number | 1 |
Turn Bar: number | 1 |
Lamination Unit: number | 1 |
Waste Rewinder: number | 1 |
Note:
Voltage | 3 phase 380V, 50HZ Please kindly inform us if different |
Diameter of air shafts | 76mm Please kindly inform us if different |
Diameter of printing plate | 1.7mm Please kindly inform us if different |
Diameter of plate mounting tape | 0.38mm Please kindly inform us if different |
The size of printing cylinder and ceramic anilox roller also need to inform us. | |
